Zen

Translation

The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS Ttime
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update Ssystem Ttime'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital Cclock
If you prefer a digital clock, you can switch to it by turning off the 'Analog Cclock' setting in the Clock tool's settings. This will show a large digital clock on the screen.
guide_tool_clock.txt:1
English
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update system time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital clock
If you prefer a digital clock, you can switch to it by turning off the 'Analog clock' setting in the Clock tool's settings. This will show a large digital clock on the screen.
294/8720 · 872

Sign in to save the translation.

Key English Yue (Traditional) Actions
guide_tool_beacons.txt:1
The Beacons tool can be used to save locations and navigate to them later.

## Creating a beacon
1. Tap the '+' button in the bottom-right corner of the screen.
2. Click 'Beacon'.
3. Enter a name for the beacon.
4. Enter a location for the beacon. You can tap the GPS icon next to the location field to use your current location.
5. Fill out any of the optional fields you want to record.
6. Click the checkmark button in the top-right corner of the screen.

### Optional fields
- **Elevation**: The elevation of the beacon. You can click the elevation icon next to the elevation field to use your current elevation.
- **Create at distance**: If you want to place a beacon at a known distance and direction from a location, you can toggle this on. You will then need to enter the distance away and set the direction to the new location before you can save the beacon. The new beacon will be placed at the distance and direction away from the location entered above.
- **Group**: The group to add the beacon to. Tap a group and click 'OK' to add the beacon to that group. To create a new group, see the 'Organizing beacons' section below.
- **Color**: The color to use for the beacon.
- **Icon**: The icon to use for the beacon.
- **Notes**: Any notes you want to record about the beacon.

### Creating from a QR code
Beacons can be shared as a QR code by clicking the menu button on the beacon row you want to share, then selecting 'Share...'. You can then share the QR code with Trail Sense to create a beacon from it.

1. Tap the '+' button in the bottom-right corner of the screen.
2. Click 'QR code'.
3. Scan the QR code you want to create a beacon from.
4. Follow the steps above to fill out the beacon information. Any information from the QR code will be prefilled.

### Creating from a GPX file
If you have locations saved in a GPX file, you can import them into Trail Sense as beacons.

1. Tap the '+' button in the bottom-right corner of the screen.
2. Click 'GPX file'.
3. Select the GPX file you want to load beacons from.
4. Confirm that you want to import the beacons by clicking 'OK'. You can uncheck any beacons you don't want to import.
5. The beacons will be created in the current group.

## Viewing a beacon
Beacons will be shown in the beacon list and will display the distance to the beacon from your current location.

To open a beacon, click the beacon in the list. This will open the beacon details page. The following information will be shown:
- **Name**: The name of the beacon.
- **Location**: The location of the beacon.
- **Elevation**: The elevation of the beacon.
- **Distance**: The distance to the beacon from your current location.
- **Historic high/low temperature**: The historical average high and low temperature for the beacon's location. See the 'Climate' guide for more information.
- **Sunrise/sunset**: The sunrise and sunset times for the beacon's location.
- **Notes**: Any notes you recorded about the beacon.

## Navigate to a beacon
To navigate to a beacon, open the beacon you want to navigate to and click the 'Navigate' button at the bottom. This will open the navigation tool with the beacon as the destination. Alternatively, you can click the menu button on the beacon row you want to navigate to, then select 'Navigate'.

See the 'Navigation' guide for more information on how to use the navigation tool.

## Beacon visibility
You can choose which beacons are visible on the Navigation and Photo Maps tools by clicking the eye icon on the right side of the beacon row. This will toggle the visibility of the beacon.

## Share a beacon
You can share a beacon by clicking the menu button on the beacon row you want to share, then selecting 'Share...'. Alternatively, open the beacon and click the menu button in the top-right, then choose 'Share...'. You can choose from the following options:

- **Copy**: Copies the beacon details to your clipboard.
- **QR code**: Shares a QR code for the beacon.
- **Maps**: Shares the beacon to a maps application.
- **Send**: Shares the beacon details to another app as text.

## Edit a beacon
To edit a beacon, open the beacon and click the edit button at the bottom. Alternatively, click the menu button on the beacon row you want to edit, then select 'Edit'.

See the 'Creating a beacon' section above for information on the fields you can edit.

## Delete a beacon
To delete a beacon, click the menu button on the beacon row you want to remove, then select 'Delete'. Alternatively, open the beacon, click the menu button in the top-right, and choose 'Delete'.

## Exporting beacons
To export beacons, open the group you want to export and click the menu button in the top-right corner of the screen. Select 'Export', unselect any beacons you don't want to export, then click 'OK'. The beacons will be exported to a GPX file.

## Organizing beacons
You can organize beacons into groups. To create a group, click the '+' button in the bottom-right of the beacon list and select 'Group'. Give the group a name and click 'OK'. Click the group in the list to view the beacons in that group.

If you create a beacon or group while the group is open, the new beacon or group will be added to the currently open group.

To change the group of an existing beacon, click the menu button on the beacon row you want to move, select 'Move to', and choose the target group.

To rename a group, click the menu button on the group row you want to rename, then select 'Rename' and provide a new name.

You can delete a group (along with all beacons within it) by clicking the menu button on the group row you wish to remove, then selecting 'Delete'.

## Searching for beacons
To search through your created beacons, use the search bar at the top of the beacon list. This search encompasses the current group and all subgroups. Additionally, you can sort beacons by distance, time, or name by clicking the menu button in the top-right and selecting 'Sort'.

## Last cell signal beacon
If you have Backtrack enabled (see the 'Paths' guide) and it is configured to record cell signal, you will see a beacon created for the last known location where you had a cell signal.

You can disable this beacon in Settings > Paths > 'Last signal beacon'.

You can also choose to navigate to the nearest cell signal by clicking the menu button at the top-right of the beacon list and selecting 'Navigate to nearest cell signal'. This will start navigation to the nearest recorded location that has a cell signal.

## Quick action
You can enable the Create Beacon quick action in the settings for the desired tab.

To use the quick action, tap the Beacon quick action button to create a beacon at your current location. The title of the beacon will be set to the current date and time. Once created you will see a notification at the bottom of the screen with a button to view the beacon.
 
guide_tool_bubble_level.txt:1
The Bubble Level tool can be used to determine if a surface is flat. This can be helpful for setting up a tent or a cooking stove.

## Determine if a surface is flat
To determine if a surface is flat:

1. Place the device flat on the surface.
2. Wait for the bubble level to settle.
3. If the bubble is centered, the surface is flat. If the bubble is to the left of the screen, the surface is higher on the left side. If the bubble is at the top of the screen, the surface is higher on the top side.

The exact angle of the surface in degrees on the X (left/right) and Y (top/bottom) axis is displayed at the top.

It is also possible to hold the device on its side to measure an angle and use the Y axis to measure the angle.
 
guide_tool_cliff_height.txt:1
The Cliff Height tool can be used to estimate the height of a cliff.

## Estimating height
1. Ensure the area below the cliff is safe (no risk of landslides or people/animals).
2. Drop a small rock or similar object down the cliff while holding the measure button.
3. Release the button when the object hits the bottom.
4. The height of the cliff will be displayed at the top of the screen.

## Disclaimer
You are responsible for ensuring that you use this tool in a safe manner. Please only use it when it is safe to do so, and do not stand too close to the cliff.
 
guide_tool_climate.txt:1
The Climate tool displays historical climate data for a given location.

## Temperature
The historical high and low temperatures are displayed at the top of the screen for the selected date. The chart also displays high temperatures as a red line and the low temperatures as a blue line.

The freezing point is displayed in the bottom portion of the chart as a filled area.

## Changing the date
To change the date, you can tap the calendar icon above the chart and select a date. Additionally, you can use the arrows to move to the next/previous date or long press the calendar to quickly jump to today's date.

Tapping on one of the lines on the chart will also change the date to the point you tapped.

## Changing the location
By default, your current location is used. If you want to change this, enter a new location in the input field below the chart. You can also change the elevation using the elevation input field.

## Accuracy
Climate normals are based on the 30-year average of the historical data and indicate what the weather usually is. The actual values may differ for a variety of reasons but should remain fairly close to the historical values. Large differences are normally due to a storm or other weather event.

Historic temperatures are estimated using a custom 30-year "climate normal" model derived from the NASA Global Modeling and Assimilation Office - MERRA-2 data (1991 - 2020).
 
guide_tool_clinometer.txt:1
The Clinometer tool measures angles and can be used to determine the slope of a hill, the height of an object, or the distance to an object. It can also be used to determine avalanche risk.

The following guide uses a tree as an example, but the same steps can be used for any object.

## Measure a slope
To measure a slope (or any angle), align the line in the center of the viewfinder with the top of the hill. Tapping anywhere on the screen will lock the clinometer, and tapping again will unlock it.

Alternatively, you can use the side of your phone to measure a slope. To do this, tap the screen icon in the top-left. Then hold your phone vertically and use the side (where the volume and power buttons are normally located) of your phone to sight. Look down the side of your phone and point it at the top of the hill. You will see the angle change at the top of the screen.

The slope percentage or grade is also shown under the angle.

If you would prefer to lock the angle using the volume buttons instead of tapping the screen, you can enable this in Settings > Clinometer > Lock with volume buttons.

The angle measurements will also be displayed on the camera viewfinder.

## Measuring avalanche risk
Most avalanches occur on slopes between 30° (57%) and 45° (100%). When you measure the angle of a slope, the avalanche risk will be displayed at the bottom of your screen. You can also use the color bands on the clinometer dial; red indicates high risk, yellow indicates moderate risk, and green indicates low risk.

## Estimate the height of a tree
The height of a tree can be measured if the distance to the tree is known.

1. Tap the ruler icon in the top-right.
2. Tap 'Height'.
3. Enter the distance to the tree.
4. Align the clinometer to the base of the tree.
5. Tap the screen and hold.
6. Realign the clinometer to the top of the tree.
7. Release to lock and see the height of the tree.

If you normally measure the height of trees at the same distance, you can set a default distance in Settings > Clinometer > Baseline distance.

## Estimate the distance to a tree (known height)
If you know the height of a tree, you can estimate the distance to it by using the clinometer.

1. Tap the ruler icon in the top-right.
2. Tap 'Distance'.
3. Enter the height of the tree.
4. Align the clinometer to the base of the tree.
5. Tap the screen and hold.
6. Realign the clinometer to the top of the tree.
7. Release to lock and see the distance to the tree.

## Estimate the distance to a tree (unknown height)
If you do not know the height of the tree, you can still estimate the distance to it by using your height as a reference.

1. Tap the ruler icon in the top-right.
2. Tap 'Distance'.
3. Enter your height.
4. Stand next to the tree and take note of where the top of your head is on the tree.
5. Walk away from the tree to the place where you want to measure the distance.
6. Align the clinometer to the base of the tree.
7. Tap the screen and hold.
8. Realign the clinometer to where the top of your head was on the tree.
9. Release to lock and see the distance to the tree.

## Disclaimer
Trail Sense uses a general rule of thumb to determine if a slope has avalanche potential, which is limited by your phone's sensors. If you think a slope is unsafe, then try to find an alternate route to avoid it or take precautions.
 
guide_tool_clock.txt:1
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update system time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital clock
If you prefer a digital clock, you can switch to it by turning off the 'Analog clock' setting in the Clock tool's settings. This will show a large digital clock on the screen.
「時鐘」架生可以用 GPS 衛星嚟斷定現時嘅時間。

## 睇下 GPS 時間
當您一開啟「時鐘」架生，鐘面就會睇到您部機現時設定嘅時間。等您攞到 GPS 定位，個鐘就會自動更新，騷返準確嘅 GPS 時間。若然要重新整理 GPS 時間，可以撳一下左上角嘅重新整理公仔。

## 將您個時鐘同步
若要將您部機個時鐘同步成 GPS 時間：

1. 撳一下「更新系統時間」。
2. 記低彈出嚟個框框騷出嚟嘅時間。
3. 撳一下「確定」去開啟您部機嘅時間設定。
4. 校返去記低嘅時間，然後等埋個同步通知至儲存。
5. 當收到通知就儲存時間更新。
6. 您嘅系統時間現時就同 GPS 時間同步喇。
guide_tool_clouds.txt:1
The Clouds tool assists you in tracking and predicting weather patterns by identifying clouds. If your phone is equipped with a barometer, Trail Sense can merge cloud observations with barometer readings to enhance weather prediction on the Weather tool.

## Cloud log
In the cloud log, you'll find the last 48 hours of cloud observations. Each row includes the observation time, cloud type, and potential weather indications. Click on a row for more details about the cloud, including its description, possible weather outcomes, precipitation chances, and common precipitation types it can generate. To delete an observation, use the menu button located on the right of each row. Additionally, you can click on the cloud image to view a larger version.

## Logging a cloud
To log a cloud, tap the '+' button at the bottom-right. You can choose to use a picture of the cloud from your device's files or camera, or manually identify the cloud.

### Automatic identification
If you opt to use the camera or a file, Trail Sense will make an attempt to identify the cloud for you. It will display its confidence in each cloud type and allow you to select the cloud types you wish to log using the checkboxes. By default, it selects the most likely cloud type(s). You can also adjust the observation time by clicking on the time at the top of the screen. Once you're satisfied with the observation, click the checkmark button at the top-right of the screen.

### Manual identification
If you choose to manually identify the cloud, you will see a list of cloud types. Use the checkboxes to select the cloud types you want to log. You can also adjust the observation time by clicking on the time at the top of the screen. Once you're satisfied with the observation, click the checkmark button at the top-right of the screen.

## Quick action
You can enable the Cloud Scanner quick action in the settings for the tab where you want it to appear.

Tapping the quick action button will open your camera to take a picture of a cloud to identify. Long pressing the button will open the Clouds tool.
 
guide_tool_convert.txt:1
The Convert tool can be used to convert various measurement units.

## Coordinates
To convert a location from one coordinate system to another, swipe to the 'Coordinates' tab of the Convert tool (open by default). Then enter the coordinates and the To unit, and the result will be displayed. Trail Sense will automatically detect the coordinate system of the input if it is supported. For a list of supported coordinate systems, click on the "To" field.

## Distance
To convert a distance from one unit to another, swipe to the 'Distance' tab of the Convert tool. Then enter the distance, From unit, and To unit, and the result will be displayed.

## Temperature
To convert a temperature from one unit to another, swipe to the 'Temperature' tab of the Convert tool. Then enter the temperature, From unit, and To unit, and the result will be displayed.

## Volume
To convert a volume from one unit to another, swipe to the 'Volume' tab of the Convert tool. Then enter the volume, From unit, and To unit, and the result will be displayed.

## Weight
To convert a weight from one unit to another, swipe to the 'Weight' tab of the Convert tool. Then enter the weight, From unit, and To unit, and the result will be displayed.

## Time
To convert a time from one unit to another, swipe to the 'Time' tab of the Convert tool. Then enter the time, From unit, and To unit, and the result will be displayed.
 
guide_tool_diagnostics.txt:1
The Diagnostics tool can be used to detect common issues that impact tools in Trail Sense. If you are experiencing issues with the app, try running the diagnostics tool to see if it can detect the issue.

## Diagnostics list
Trail Sense will list any warnings or errors that it detects. Warnings will have a yellow icon, and errors will have a red icon.

You can click on each item to see more information about the issue and how to resolve it.

The diagnostics tool can detect:
- Poor sensor accuracy
- Missing sensors
- Missing permissions
- Blocked notifications
- Accidental location/altitude overrides
- Restricted background access
- Disabled services
 
guide_tool_flashlight.txt:1
The Flashlight tool can be used to provide light or signal for help. As with any tool in Trail Sense, it is always best to carry a real flashlight with you.

## Flashlight
Tap the flashlight button to toggle the flashlight on or off. When the flashlight is on (in any mode), a notification will be displayed to allow you to quickly turn it off.

On supported devices, you can adjust the brightness using the slider at the bottom.

## Strobe
Drag the dial to the desired strobe frequency. Tap the flashlight button to toggle the strobe on or off.

Please note that the strobe feature contains flashing lights, which may be dangerous for some users. Prolonged use of the strobe may cause excess battery drain or damage to your camera's flash.

## SOS
Drag the dial to the SOS indicator to continuously play the SOS distress signal (3 short, 3 long, 3 short). Tap the flashlight button to toggle the SOS on or off.

## Screen
You can use your screen as a flashlight, which may be better for close-up work. Tap the screen button to start. From there, you can adjust the brightness using the slider at the bottom, and toggle the color between red (preserves night vision) and white (brighter) using the button at the top.

Press back or tap the 'Turn off' button to turn off the screen flashlight. Your settings will be saved for next time.

## Automatically turn off
You can set the flashlight to automatically turn off after a certain amount of time by enabling 'Settings > Flashlight > Automatically turn off' and selecting the desired time. This can be useful to save battery if you forget to turn off the flashlight.

## Toggle with volume buttons
You can set the flashlight to toggle on or off when you press either volume button by enabling 'Settings > Flashlight > Toggle with volume buttons'. This only works while Trail Sense is open.

## Quick action

### Flashlight
You can enable the Flashlight quick action in the settings for the tab you want it on.

To use the quick action, tap the flashlight quick action button to toggle it on or off.

### Screen flashlight
You can enable the Screen Flashlight quick action in the settings for the tab you want it on. Tap the quick action button to open the screen flashlight.
 
guide_tool_light_meter.txt:1
The Light Meter tool measures a flashlight's beam distance, which is how far it can project usable light.

## Testing flashlight beam distance
To measure a flashlight's beam distance:

1. Go into a dark room.
2. Place your phone on the floor, screen up.
3. Enter the distance at which you will hold the flashlight from the phone (e.g., 3 feet / 1 meter).
4. Holding the flashlight at the set distance, point it at the phone screen and turn it on.
5. Move the flashlight around while maintaining the set distance and keeping it pointed at your phone.
6. Once the reading stops changing, the beam distance has been determined.
7. You can click 'Reset' to test another flashlight.

## Choosing an appropriate beam distance
The beam distance you need depends on how you will use the flashlight:
- For camping, a shorter beam lets you see your immediate surroundings.
- For hiking, a longer beam lets you see farther ahead - try starting with 300 feet (100 meters).
 
Key English Yue (Traditional) Actions
guide_tool_beacons.txt:1
The Beacons tool can be used to save locations and navigate to them later.

## Creating a beacon
1. Tap the '+' button in the bottom-right corner of the screen.
2. Click 'Beacon'.
3. Enter a name for the beacon.
4. Enter a location for the beacon. You can tap the GPS icon next to the location field to use your current location.
5. Fill out any of the optional fields you want to record.
6. Click the checkmark button in the top-right corner of the screen.

### Optional fields
- **Elevation**: The elevation of the beacon. You can click the elevation icon next to the elevation field to use your current elevation.
- **Create at distance**: If you want to place a beacon at a known distance and direction from a location, you can toggle this on. You will then need to enter the distance away and set the direction to the new location before you can save the beacon. The new beacon will be placed at the distance and direction away from the location entered above.
- **Group**: The group to add the beacon to. Tap a group and click 'OK' to add the beacon to that group. To create a new group, see the 'Organizing beacons' section below.
- **Color**: The color to use for the beacon.
- **Icon**: The icon to use for the beacon.
- **Notes**: Any notes you want to record about the beacon.

### Creating from a QR code
Beacons can be shared as a QR code by clicking the menu button on the beacon row you want to share, then selecting 'Share...'. You can then share the QR code with Trail Sense to create a beacon from it.

1. Tap the '+' button in the bottom-right corner of the screen.
2. Click 'QR code'.
3. Scan the QR code you want to create a beacon from.
4. Follow the steps above to fill out the beacon information. Any information from the QR code will be prefilled.

### Creating from a GPX file
If you have locations saved in a GPX file, you can import them into Trail Sense as beacons.

1. Tap the '+' button in the bottom-right corner of the screen.
2. Click 'GPX file'.
3. Select the GPX file you want to load beacons from.
4. Confirm that you want to import the beacons by clicking 'OK'. You can uncheck any beacons you don't want to import.
5. The beacons will be created in the current group.

## Viewing a beacon
Beacons will be shown in the beacon list and will display the distance to the beacon from your current location.

To open a beacon, click the beacon in the list. This will open the beacon details page. The following information will be shown:
- **Name**: The name of the beacon.
- **Location**: The location of the beacon.
- **Elevation**: The elevation of the beacon.
- **Distance**: The distance to the beacon from your current location.
- **Historic high/low temperature**: The historical average high and low temperature for the beacon's location. See the 'Climate' guide for more information.
- **Sunrise/sunset**: The sunrise and sunset times for the beacon's location.
- **Notes**: Any notes you recorded about the beacon.

## Navigate to a beacon
To navigate to a beacon, open the beacon you want to navigate to and click the 'Navigate' button at the bottom. This will open the navigation tool with the beacon as the destination. Alternatively, you can click the menu button on the beacon row you want to navigate to, then select 'Navigate'.

See the 'Navigation' guide for more information on how to use the navigation tool.

## Beacon visibility
You can choose which beacons are visible on the Navigation and Photo Maps tools by clicking the eye icon on the right side of the beacon row. This will toggle the visibility of the beacon.

## Share a beacon
You can share a beacon by clicking the menu button on the beacon row you want to share, then selecting 'Share...'. Alternatively, open the beacon and click the menu button in the top-right, then choose 'Share...'. You can choose from the following options:

- **Copy**: Copies the beacon details to your clipboard.
- **QR code**: Shares a QR code for the beacon.
- **Maps**: Shares the beacon to a maps application.
- **Send**: Shares the beacon details to another app as text.

## Edit a beacon
To edit a beacon, open the beacon and click the edit button at the bottom. Alternatively, click the menu button on the beacon row you want to edit, then select 'Edit'.

See the 'Creating a beacon' section above for information on the fields you can edit.

## Delete a beacon
To delete a beacon, click the menu button on the beacon row you want to remove, then select 'Delete'. Alternatively, open the beacon, click the menu button in the top-right, and choose 'Delete'.

## Exporting beacons
To export beacons, open the group you want to export and click the menu button in the top-right corner of the screen. Select 'Export', unselect any beacons you don't want to export, then click 'OK'. The beacons will be exported to a GPX file.

## Organizing beacons
You can organize beacons into groups. To create a group, click the '+' button in the bottom-right of the beacon list and select 'Group'. Give the group a name and click 'OK'. Click the group in the list to view the beacons in that group.

If you create a beacon or group while the group is open, the new beacon or group will be added to the currently open group.

To change the group of an existing beacon, click the menu button on the beacon row you want to move, select 'Move to', and choose the target group.

To rename a group, click the menu button on the group row you want to rename, then select 'Rename' and provide a new name.

You can delete a group (along with all beacons within it) by clicking the menu button on the group row you wish to remove, then selecting 'Delete'.

## Searching for beacons
To search through your created beacons, use the search bar at the top of the beacon list. This search encompasses the current group and all subgroups. Additionally, you can sort beacons by distance, time, or name by clicking the menu button in the top-right and selecting 'Sort'.

## Last cell signal beacon
If you have Backtrack enabled (see the 'Paths' guide) and it is configured to record cell signal, you will see a beacon created for the last known location where you had a cell signal.

You can disable this beacon in Settings > Paths > 'Last signal beacon'.

You can also choose to navigate to the nearest cell signal by clicking the menu button at the top-right of the beacon list and selecting 'Navigate to nearest cell signal'. This will start navigation to the nearest recorded location that has a cell signal.

## Quick action
You can enable the Create Beacon quick action in the settings for the desired tab.

To use the quick action, tap the Beacon quick action button to create a beacon at your current location. The title of the beacon will be set to the current date and time. Once created you will see a notification at the bottom of the screen with a button to view the beacon.
 
guide_tool_bubble_level.txt:1
The Bubble Level tool can be used to determine if a surface is flat. This can be helpful for setting up a tent or a cooking stove.

## Determine if a surface is flat
To determine if a surface is flat:

1. Place the device flat on the surface.
2. Wait for the bubble level to settle.
3. If the bubble is centered, the surface is flat. If the bubble is to the left of the screen, the surface is higher on the left side. If the bubble is at the top of the screen, the surface is higher on the top side.

The exact angle of the surface in degrees on the X (left/right) and Y (top/bottom) axis is displayed at the top.

It is also possible to hold the device on its side to measure an angle and use the Y axis to measure the angle.
 
guide_tool_cliff_height.txt:1
The Cliff Height tool can be used to estimate the height of a cliff.

## Estimating height
1. Ensure the area below the cliff is safe (no risk of landslides or people/animals).
2. Drop a small rock or similar object down the cliff while holding the measure button.
3. Release the button when the object hits the bottom.
4. The height of the cliff will be displayed at the top of the screen.

## Disclaimer
You are responsible for ensuring that you use this tool in a safe manner. Please only use it when it is safe to do so, and do not stand too close to the cliff.
 
guide_tool_climate.txt:1
The Climate tool displays historical climate data for a given location.

## Temperature
The historical high and low temperatures are displayed at the top of the screen for the selected date. The chart also displays high temperatures as a red line and the low temperatures as a blue line.

The freezing point is displayed in the bottom portion of the chart as a filled area.

## Changing the date
To change the date, you can tap the calendar icon above the chart and select a date. Additionally, you can use the arrows to move to the next/previous date or long press the calendar to quickly jump to today's date.

Tapping on one of the lines on the chart will also change the date to the point you tapped.

## Changing the location
By default, your current location is used. If you want to change this, enter a new location in the input field below the chart. You can also change the elevation using the elevation input field.

## Accuracy
Climate normals are based on the 30-year average of the historical data and indicate what the weather usually is. The actual values may differ for a variety of reasons but should remain fairly close to the historical values. Large differences are normally due to a storm or other weather event.

Historic temperatures are estimated using a custom 30-year "climate normal" model derived from the NASA Global Modeling and Assimilation Office - MERRA-2 data (1991 - 2020).
 
guide_tool_clinometer.txt:1
The Clinometer tool measures angles and can be used to determine the slope of a hill, the height of an object, or the distance to an object. It can also be used to determine avalanche risk.

The following guide uses a tree as an example, but the same steps can be used for any object.

## Measure a slope
To measure a slope (or any angle), align the line in the center of the viewfinder with the top of the hill. Tapping anywhere on the screen will lock the clinometer, and tapping again will unlock it.

Alternatively, you can use the side of your phone to measure a slope. To do this, tap the screen icon in the top-left. Then hold your phone vertically and use the side (where the volume and power buttons are normally located) of your phone to sight. Look down the side of your phone and point it at the top of the hill. You will see the angle change at the top of the screen.

The slope percentage or grade is also shown under the angle.

If you would prefer to lock the angle using the volume buttons instead of tapping the screen, you can enable this in Settings > Clinometer > Lock with volume buttons.

The angle measurements will also be displayed on the camera viewfinder.

## Measuring avalanche risk
Most avalanches occur on slopes between 30° (57%) and 45° (100%). When you measure the angle of a slope, the avalanche risk will be displayed at the bottom of your screen. You can also use the color bands on the clinometer dial; red indicates high risk, yellow indicates moderate risk, and green indicates low risk.

## Estimate the height of a tree
The height of a tree can be measured if the distance to the tree is known.

1. Tap the ruler icon in the top-right.
2. Tap 'Height'.
3. Enter the distance to the tree.
4. Align the clinometer to the base of the tree.
5. Tap the screen and hold.
6. Realign the clinometer to the top of the tree.
7. Release to lock and see the height of the tree.

If you normally measure the height of trees at the same distance, you can set a default distance in Settings > Clinometer > Baseline distance.

## Estimate the distance to a tree (known height)
If you know the height of a tree, you can estimate the distance to it by using the clinometer.

1. Tap the ruler icon in the top-right.
2. Tap 'Distance'.
3. Enter the height of the tree.
4. Align the clinometer to the base of the tree.
5. Tap the screen and hold.
6. Realign the clinometer to the top of the tree.
7. Release to lock and see the distance to the tree.

## Estimate the distance to a tree (unknown height)
If you do not know the height of the tree, you can still estimate the distance to it by using your height as a reference.

1. Tap the ruler icon in the top-right.
2. Tap 'Distance'.
3. Enter your height.
4. Stand next to the tree and take note of where the top of your head is on the tree.
5. Walk away from the tree to the place where you want to measure the distance.
6. Align the clinometer to the base of the tree.
7. Tap the screen and hold.
8. Realign the clinometer to where the top of your head was on the tree.
9. Release to lock and see the distance to the tree.

## Disclaimer
Trail Sense uses a general rule of thumb to determine if a slope has avalanche potential, which is limited by your phone's sensors. If you think a slope is unsafe, then try to find an alternate route to avoid it or take precautions.
 
guide_tool_clock.txt:1
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update system time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital clock
If you prefer a digital clock, you can switch to it by turning off the 'Analog clock' setting in the Clock tool's settings. This will show a large digital clock on the screen.
「時鐘」架生可以用 GPS 衛星嚟斷定現時嘅時間。

## 睇下 GPS 時間
當您一開啟「時鐘」架生，鐘面就會睇到您部機現時設定嘅時間。等您攞到 GPS 定位，個鐘就會自動更新，騷返準確嘅 GPS 時間。若然要重新整理 GPS 時間，可以撳一下左上角嘅重新整理公仔。

## 將您個時鐘同步
若要將您部機個時鐘同步成 GPS 時間：

1. 撳一下「更新系統時間」。
2. 記低彈出嚟個框框騷出嚟嘅時間。
3. 撳一下「確定」去開啟您部機嘅時間設定。
4. 校返去記低嘅時間，然後等埋個同步通知至儲存。
5. 當收到通知就儲存時間更新。
6. 您嘅系統時間現時就同 GPS 時間同步喇。
guide_tool_clouds.txt:1
The Clouds tool assists you in tracking and predicting weather patterns by identifying clouds. If your phone is equipped with a barometer, Trail Sense can merge cloud observations with barometer readings to enhance weather prediction on the Weather tool.

## Cloud log
In the cloud log, you'll find the last 48 hours of cloud observations. Each row includes the observation time, cloud type, and potential weather indications. Click on a row for more details about the cloud, including its description, possible weather outcomes, precipitation chances, and common precipitation types it can generate. To delete an observation, use the menu button located on the right of each row. Additionally, you can click on the cloud image to view a larger version.

## Logging a cloud
To log a cloud, tap the '+' button at the bottom-right. You can choose to use a picture of the cloud from your device's files or camera, or manually identify the cloud.

### Automatic identification
If you opt to use the camera or a file, Trail Sense will make an attempt to identify the cloud for you. It will display its confidence in each cloud type and allow you to select the cloud types you wish to log using the checkboxes. By default, it selects the most likely cloud type(s). You can also adjust the observation time by clicking on the time at the top of the screen. Once you're satisfied with the observation, click the checkmark button at the top-right of the screen.

### Manual identification
If you choose to manually identify the cloud, you will see a list of cloud types. Use the checkboxes to select the cloud types you want to log. You can also adjust the observation time by clicking on the time at the top of the screen. Once you're satisfied with the observation, click the checkmark button at the top-right of the screen.

## Quick action
You can enable the Cloud Scanner quick action in the settings for the tab where you want it to appear.

Tapping the quick action button will open your camera to take a picture of a cloud to identify. Long pressing the button will open the Clouds tool.
 
guide_tool_convert.txt:1
The Convert tool can be used to convert various measurement units.

## Coordinates
To convert a location from one coordinate system to another, swipe to the 'Coordinates' tab of the Convert tool (open by default). Then enter the coordinates and the To unit, and the result will be displayed. Trail Sense will automatically detect the coordinate system of the input if it is supported. For a list of supported coordinate systems, click on the "To" field.

## Distance
To convert a distance from one unit to another, swipe to the 'Distance' tab of the Convert tool. Then enter the distance, From unit, and To unit, and the result will be displayed.

## Temperature
To convert a temperature from one unit to another, swipe to the 'Temperature' tab of the Convert tool. Then enter the temperature, From unit, and To unit, and the result will be displayed.

## Volume
To convert a volume from one unit to another, swipe to the 'Volume' tab of the Convert tool. Then enter the volume, From unit, and To unit, and the result will be displayed.

## Weight
To convert a weight from one unit to another, swipe to the 'Weight' tab of the Convert tool. Then enter the weight, From unit, and To unit, and the result will be displayed.

## Time
To convert a time from one unit to another, swipe to the 'Time' tab of the Convert tool. Then enter the time, From unit, and To unit, and the result will be displayed.
 
guide_tool_diagnostics.txt:1
The Diagnostics tool can be used to detect common issues that impact tools in Trail Sense. If you are experiencing issues with the app, try running the diagnostics tool to see if it can detect the issue.

## Diagnostics list
Trail Sense will list any warnings or errors that it detects. Warnings will have a yellow icon, and errors will have a red icon.

You can click on each item to see more information about the issue and how to resolve it.

The diagnostics tool can detect:
- Poor sensor accuracy
- Missing sensors
- Missing permissions
- Blocked notifications
- Accidental location/altitude overrides
- Restricted background access
- Disabled services
 
guide_tool_flashlight.txt:1
The Flashlight tool can be used to provide light or signal for help. As with any tool in Trail Sense, it is always best to carry a real flashlight with you.

## Flashlight
Tap the flashlight button to toggle the flashlight on or off. When the flashlight is on (in any mode), a notification will be displayed to allow you to quickly turn it off.

On supported devices, you can adjust the brightness using the slider at the bottom.

## Strobe
Drag the dial to the desired strobe frequency. Tap the flashlight button to toggle the strobe on or off.

Please note that the strobe feature contains flashing lights, which may be dangerous for some users. Prolonged use of the strobe may cause excess battery drain or damage to your camera's flash.

## SOS
Drag the dial to the SOS indicator to continuously play the SOS distress signal (3 short, 3 long, 3 short). Tap the flashlight button to toggle the SOS on or off.

## Screen
You can use your screen as a flashlight, which may be better for close-up work. Tap the screen button to start. From there, you can adjust the brightness using the slider at the bottom, and toggle the color between red (preserves night vision) and white (brighter) using the button at the top.

Press back or tap the 'Turn off' button to turn off the screen flashlight. Your settings will be saved for next time.

## Automatically turn off
You can set the flashlight to automatically turn off after a certain amount of time by enabling 'Settings > Flashlight > Automatically turn off' and selecting the desired time. This can be useful to save battery if you forget to turn off the flashlight.

## Toggle with volume buttons
You can set the flashlight to toggle on or off when you press either volume button by enabling 'Settings > Flashlight > Toggle with volume buttons'. This only works while Trail Sense is open.

## Quick action

### Flashlight
You can enable the Flashlight quick action in the settings for the tab you want it on.

To use the quick action, tap the flashlight quick action button to toggle it on or off.

### Screen flashlight
You can enable the Screen Flashlight quick action in the settings for the tab you want it on. Tap the quick action button to open the screen flashlight.
 

Loading…

User avatar None

String updated in the repository

  1. Trail Sense
  2. Trail Sense User Guide
  3. Yue (Traditional)
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update system time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital clock
If you prefer a digital clock, you can switch to it by turning off the 'Analog clock' setting in the Clock tool's settings. This will show a large digital clock on the screen.
「時鐘」架生可以用 GPS 衛星嚟斷定現時嘅時間。

## 睇下 GPS 時間
當您一開啟「時鐘」架生，鐘面就會睇到您部機現時設定嘅時間。等您攞到 GPS 定位，個鐘就會自動更新，騷返準確嘅 GPS 時間。若然要重新整理 GPS 時間，可以撳一下左上角嘅重新整理公仔。

## 將您個時鐘同步
若要將您部機個時鐘同步成 GPS 時間：

1. 撳一下「更新系統時間」。
2. 記低彈出嚟個框框騷出嚟嘅時間。
3. 撳一下「確定」去開啟您部機嘅時間設定。
4. 校返去記低嘅時間，然後等埋個同步通知至儲存。
5. 當收到通知就儲存時間更新。
6. 您嘅系統時間現時就同 GPS 時間同步喇。
2 weeks ago
User avatar None

Source string changed

  1. Trail Sense
  2. Trail Sense User Guide
  3. Yue (Traditional)
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS Ttime
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update Ssystem Ttime'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital Cclock
If you prefer a digital clock, you can switch to it by turning off the 'Analog Cclock' setting in the Clock tool's settings. This will show a large digital clock on the screen.
2 weeks ago
User avatar None

String updated in the repository

  1. Trail Sense
  2. Trail Sense User Guide
  3. Yue (Traditional)
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS Time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update System Time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital Clock
If you prefer a digital clock, you can switch to it by turning off the Analog Clock setting in the Clock tool's settings. This will show a large digital clock on the screen.
「時鐘」架生可以用 GPS 衛星嚟斷定現時嘅時間。

## 睇下 GPS 時間
當您一開啟「時鐘」架生，鐘面就會睇到您部機現時設定嘅時間。等您攞到 GPS 定位，個鐘就會自動更新，騷返準確嘅 GPS 時間。若然要重新整理 GPS 時間，可以撳一下左上角嘅重新整理公仔。

## 將您個時鐘同步
若要將您部機個時鐘同步成 GPS 時間：

1. 撳一下「更新系統時間」。
2. 記低彈出嚟個框框騷出嚟嘅時間。
3. 撳一下「確定」去開啟您部機嘅時間設定。
4. 校返去記低嘅時間，然後等埋個同步通知至儲存。
5. 當收到通知就儲存時間更新。
6. 您嘅系統時間現時就同 GPS 時間同步喇。
a month ago
User avatar None

String updated in the repository

  1. Trail Sense
  2. Trail Sense User Guide
  3. Yue (Traditional)
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS Time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update System Time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital Clock
If you prefer a digital clock, you can switch to it by turning off the Analog Clock setting in the Clock tool's settings. This will show a large digital clock on the screen.
「時鐘」架生可以用 GPS 衛星嚟斷定現時嘅時間。

## 睇下 GPS 時間
當您一開啟「時鐘」架生，鐘面就會睇到您部機現時設定嘅時間。等您攞到 GPS 定位，個鐘就會自動更新，騷返準確嘅 GPS 時間。若然要重新整理 GPS 時間，可以撳一下左上角嘅重新整理公仔。

## 將您個時鐘同步
若要將您部機個時鐘同步成 GPS 時間：

1. 撳一下「更新系統時間」。
2. 記低彈出嚟個框框騷出嚟嘅時間。
3. 撳一下「確定」去開啟您部機嘅時間設定。
4. 校返去記低嘅時間，然後等埋個同步通知至儲存。
5. 當收到通知就儲存時間更新。
6. 您嘅系統時間現時就同 GPS 時間同步喇。
a month ago
User avatar None

Source string changed

  1. Trail Sense
  2. Trail Sense User Guide
  3. Yue (Traditional)
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS Time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update System Time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.

## Digital Clock
If you prefer a digital clock, you can switch to it by turning off the Analog Clock setting in the Clock tool's settings. This will show a large digital clock on the screen.
a month ago
User avatar ray

Translation added

  1. Trail Sense
  2. Trail Sense User Guide
  3. Yue (Traditional)
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS Time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update System Time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.
「時鐘」架生可以用 GPS 衛星嚟斷定現時嘅時間。

## 睇下 GPS 時間
當您一開啟「時鐘」架生，鐘面就會睇到您部機現時設定嘅時間。等您攞到 GPS 定位，個鐘就會自動更新，騷返準確嘅 GPS 時間。若然要重新整理 GPS 時間，可以撳一下左上角嘅重新整理公仔。

## 將您個時鐘同步
若要將您部機個時鐘同步成 GPS 時間：

1. 撳一下「更新系統時間」。
2. 記低彈出嚟個框框騷出嚟嘅時間。
3. 撳一下「確定」去開啟您部機嘅時間設定。
4. 校返去記低嘅時間，然後等埋個同步通知至儲存。
5. 當收到通知就儲存時間更新。
6. 您嘅系統時間現時就同 GPS 時間同步喇。
3 months ago
User avatar None

String added in the repository

  1. Trail Sense
  2. Trail Sense User Guide
  3. Yue (Traditional)
The Clock tool can be used to determine the current time using the GPS satellites.

## Viewing GPS Time
When you first open the Clock tool, it shows your device's set time. Once you get a GPS fix, the clock automatically updates to show precise GPS time. To refresh the GPS time, tap the refresh icon in the top-left.

## Syncing Your Clock
To sync your device’s clock with GPS time:

1. Tap 'Update System Time'.
2. Note the time shown in the pop-up.
3. Tap 'OK' to open your device's time settings.
4. Enter the noted time and wait for the sync notification before saving.
5. Save the time update when the notification arrives.
6. Your system time is now synced with GPS time.
 
3 months ago
Browse all string changes

Things to check

Mismatching line breaks

Number of new lines in translation does not match source

Reset

Glossary

English Yue (Traditional)
No related strings found in the glossary.

String information

Key
guide_tool_clock.txt:1
Source string location
guide_tool_clock.txt:1
String age
3 months ago
Last updated
2 weeks ago
Source string age
5 months ago
Translation file
guides/yue, string 9